AD3000

Features

8 Stop Down Collective and 6 Stop Collective.
Selective With AD9007 24 Stop Down Collective and 16 Stop Collective Selective.
With AD9006 15 Stop Down Collective and 11 Stop Collective Selective.
Operations Traction : Regular V3F, Down Collective V3F and Collective Selective V3F.
Operations Hydraulic : Hydraulic Manual Door, Hydraulic Auto Door, Hydraulic Double Auto Door 2 Valve, 3 Valve and 4 Valve Configuration.
Speed: Up to 2 m/sec.
All system parameters can be adjusted by using 5 buttons and 4 Seven Segment placed on the card. Call Register LED and Call Push Button are on single wire.
On board Seven Segment Display.
Serial COP Card (AD_CTB) attachment using CAN bus.
All the Input and Output are Opto-isolated and available in both 12VDCand 24VDC.
All the Input and Output are carrying LED indication on board.
An error code are display on display as well as it is memories in the card.
Each floor can be named by an alphanumeric character (L, P, E, F, H, b, 0, 0, 1, 2, 3.....).
7-segment and signalization outputs are short-circuiting protected. In a short circuit case the concerned output is shut down until problem is removed. ...

It also detect the landing lock short at particular floor. Also detect lock short in Auto Door. if Door not open within predefined time.

Power down memory, in case of power fail it will reach at nearest floor instead of going to correction end.

Only 15 cables are enough for system to work by using serial car connection (AD_CTB) which reduces labor and cable costs.

Using this Up to 24 Stop Full Serial just 4 Wire Communication can be done easily.

PCBs are solder in Fully Automatic Pick & Place Robotic Machine.

Which will remove all human error.

4 Digit Display on board make easier to program parameter and view an error code.

Using CAN bus you can Program and Monitor the mother board with External Graphical Program Tool.